Single Uni-Knot – Line to Hook
The one knot requirement basic to all fishing is tying a line to the eye of a hook or swivel. Familiarize yourself with the simple procedure of using the uni-knot for this purpose, and other uni-knot applications are easy.
First, run the line through the eye of the hook for several inches. Turn the end back toward the eye to form a circle as shown in illustration #1. With thumb and finger of the left hand, grasp both strands of line and the crossing strand in a single grip at the point marked just forward of the hook. Now, make six turns with the end around both strands of line and through the circle, as in illustration #2.
Double Uni-Knot Line to Hook
Attaching lines is done the same way as tying line to hook. Compare illustrations #1 and #6 . Notice that you handle things the same way, even though the two parallel strands involved are from different pieces of line, rather than from the same piece doubled back.
The procedure is simply to form the uni-knot circle with line A around line B, going through six times and pulling down as in illustration #7. Once the knot is formed and tightened (illustration #8), reverse the lines and tie another uni-knot with line B around line A. After the two knots are finished, pull on the two main strands of line, as indicated by arrows in illustration #9, to slide the two knots together. Trim excess ends.
Nail-less Nail Knot
Use this knot to tie your leader (or connector section) to the fly line, or your backing to the fly line. It requires no tools and if done properly will not come undone. This know will NOT hold on leader to mon amnesia type line. Use the Double Uni-Knot for that
Arbor Knot – Reel Spool Knot
Surgeon’s Nail Knot – join tippet to leader knot
It is preferred by many to join tippet to leader
Improved Clinch Knot
1. An old standby for fishermen. Pass the line through the eye of hook, swivel or lure. Double back and make 5 turns around the standing line.
Hold the coils in place; thread end of line through the first loop above the eye, then through the big loop as shown.
2. Hold the tag end and standing line while coils are pulled up. Take care that coils are in spiral, not lapping over each other. Slide tight against the eye. Clip tag end.
May 16th, 2010
molitva leyli 





Posted in
Tags:
Biggest Tuna Purse Seine Vessel - ALBATUN TRES
Aluminum Alloys Spec for Hulls Frame, Hull Plating, Deckhouse and Cabin
Windsurfing Gear - Fin Design Model Choices
Fishing Bait Launcher and Hauler for Beach Longline